{
    "dataType": "CVE_RECORD",
    "dataVersion": "5.2",
    "cveMetadata": {
        "cveId": "CVE-2026-19184",
        "assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
        "state": "PUBLISHED",
        "assignerShortName": "zephyr",
        "dateReserved": "2026-08-06T18:36:10.589Z",
        "datePublished": "2026-10-05T08:06:22.681Z",
        "dateUpdated": "2026-10-05T13:23:31.086Z"
    },
    "containers": {
        "cna": {
            "providerMetadata": {
                "orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
                "shortName": "zephyr",
                "dateUpdated": "2026-10-05T08:06:22.681Z"
            },
            "title": "Out-of-bounds write in the NXP GAU ADC driver due to byte-versus-sample buffer size validation mismatch",
            "descriptions": [
                {
                    "lang": "en",
                    "value": "The NXP GAU ADC driver (drivers/adc/adc_mcux_gau_adc.c) validated the caller-supplied sequence->buffer_size, which is expressed in bytes, against the number of active channels, which is a sample count. It then stored that byte count directly in data->results_length and used it in mcux_gau_adc_read_samples() as the number of uint16_t slots available. Because each conversion result occupies sizeof(uint16_t) bytes, a buffer that was accepted as \"large enough\" could be written with up to twice its size in bytes, so every sample past the buffer's midpoint was written out of bounds.\n\nadc_read() and adc_read_async() are Zephyr system calls. The syscall verifier in drivers/adc/adc_handlers.c only confirms that the caller owns buffer_size writable bytes (K_SYSCALL_MEMORY_WRITE); deciding whether that size is sufficient for the requested channels and extra_samplings is delegated entirely to the driver. On a build with CONFIG_USERSPACE=y, a user-mode thread that has been granted the ADC device object could therefore submit a deliberately half-sized buffer and cause the driver's work-queue handler — which runs in supervisor mode, outside the caller's MPU restrictions — to write ADC conversion results past the end of that buffer, at an address and for a length of the caller's choosing.\n\nThe overrun is bounded by the requested sequence: with sequence->options->extra_samplings set, the sampling loop walks the buffer pointer forward across every sampling, so the total overrun can reach the full size of the supplied buffer (kilobytes for a large extra_samplings). The written words are 16-bit ADC conversion results, so the content is only partially attacker-influenced (via the selected analog input, gain and resolution), but the destination and length are fully controlled — sufficient for kernel memory corruption, a crash, or a userspace-to-kernel privilege escalation. Builds without CONFIG_USERSPACE, or on SoCs other than NXP RW61x with the GAU ADC node enabled, are not exposed to the privilege boundary; there the same defect only causes a silent overflow when the application itself passes an undersized buffer.\n\nThe fix replaces the ad-hoc check with the shared adc_sequence_validate_buffer() helper (validating against num_channels * sizeof(uint16_t)), stores buffer_size / sizeof(uint16_t) in results_length, and corrects the loop bound to a post-decrement so exactly the available number of slots may be written."
                }
            ],
            "affected": [
                {
                    "vendor": "zephyrproject",
                    "product": "zephyr",
                    "collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
                    "packageName": "zephyr",
                    "defaultStatus": "unaffected",
                    "programFiles": [
                        "drivers/adc/adc_mcux_gau_adc.c"
                    ],
                    "programRoutines": [
                        {
                            "name": "mcux_gau_adc_do_read"
                        },
                        {
                            "name": "mcux_gau_adc_read_samples"
                        }
                    ],
                    "versions": [
                        {
                            "version": "3.7.0",
                            "status": "affected",
                            "lessThan": "4.5.0",
                            "versionType": "semver"
                        }
                    ]
                }
            ],
            "references": [
                {
                    "url": "https://github.com/zephyrproject-rtos/zephyr/commit/82b11958065aa85f8644ddc318ff4a328d1443c8",
                    "name": "Fix commit",
                    "tags": [
                        "patch"
                    ]
                },
                {
                    "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-j86w-mfgw-fxj9",
                    "name": "GHSA-j86w-mfgw-fxj9"
                }
            ],
            "metrics": [
                {
                    "format": "CVSS",
                    "cvssV3_1": {
                        "version": "3.1",
                        "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:H/A:H",
                        "baseScore": 8.4,
                        "baseSeverity": "HIGH"
                    }
                }
            ],
            "problemTypes": [
                {
                    "descriptions": [
                        {
                            "lang": "en",
                            "description": "bounds",
                            "cweId": "CWE-787",
                            "type": "CWE"
                        }
                    ]
                }
            ],
            "x_generator": {
                "engine": "cvelib 1.8.0"
            }
        },
        "adp": [
            {
                "metrics": [
                    {
                        "other": {
                            "type": "ssvc",
                            "content": {
                                "timestamp": "2026-10-05T13:23:22.615234Z",
                                "id": "CVE-2026-19184",
                                "options": [
                                    {
                                        "Exploitation": "none"
                                    },
                                    {
                                        "Automatable": "no"
                                    },
                                    {
                                        "Technical Impact": "partial"
                                    }
                                ],
                                "role": "CISA Coordinator",
                                "version": "2.0.3"
                            }
                        }
                    }
                ],
                "title": "CISA ADP Vulnrichment",
                "providerMetadata": {
                    "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
                    "shortName": "CISA-ADP",
                    "dateUpdated": "2026-10-05T13:23:31.086Z"
                }
            }
        ]
    }
}